航空模型制作在使用過程中有時會有通電沒有反應的情況出現,尤其是夏季雷雨天過后,這種現象更是多見,為什么會出現這種問題,下面
大型航空模型制作公司具體說明下。
During the use of aviation model making, sometimes there is no response to power on, especially after thunderstorms in summer. Why this problem occurs is explained by large aviation model making companies below.
我們要知道航空模型制作的原理,航空模型公司在航空模型制作過程中,航空模型制作內部安裝了數十個大大小小的電機,然后航空模型公司加上外部電器控制箱,從而讓航空模型制作通電以后便開始按照設定好的運動方式進行循環運動。
We need to know the principle of aviation model making. In the process of aviation model making, the aviation model company installed dozens of motors, large and small, inside the aviation model making. Then the aviation model company added external electrical control boxes, so that the aviation model making began to cycle according to the set movement mode after it was powered on.
如果發現航空模型制作模型通電不動,足以檢查外部電路是否通暢,再排查內部故障,航空模型公司根據航空模型制作多年使用情況來看,如果航空模型制作表皮沒有損壞導致內部進水從燒電機,航空模型公司提示航空模型制作通電沒反應一定是電器控制箱的問題。
If it is found that the aviation model making model is not powered on, it is sufficient to check whether the external circuit is smooth first, and then troubleshoot the internal fault. According to the use of the aviation model making for many years, if the surface of the aviation model making is not damaged, resulting in water entering from the interior and burning the motor, the aviation model company will prompt that the failure of the aviation model making to power on must be the problem of the electrical control box.
航空模型制作電器控制箱內部有電路板,控制芯片組等元器件,航空模型公司介紹到了夏天，空氣濕度高容易受潮，甚是遭遇雷擊,所以航空模型制作通電不動情況,航空模型公司建議可以使用萬用電表測試下電路板是否有12V或者24V的電流,然后看看各個指示燈有沒有亮,再聽繼電器是否有正常工作,如果是正常工作會有響聲。
There are circuit boards, control chipsets and other components inside the electrical control box for aviation model making. The aviation model company introduced that in summer, the air humidity is high, and it is easy to be affected by moisture, even lightning strikes, so the aviation model making is still powered on. The aviation model company suggested that you use a multimeter to test whether the circuit board has 12V or 24V current, then see whether each indicator light is on, and then listen to whether the relay works normally, If it works normally, there will be noise.
航空模型公司提示航空模型制作補色可以使用顏料涂抹在上面,然后用畫筆輕輕擦拭,盡量和周圍的色彩結合在一起,這樣修補出來效果非常好。
The aviation model company suggests that the complementary color of the aviation model can be painted on it with paint, then gently wiped with a brush, and combined with the surrounding colors as much as possible. The effect of this repair is very good.
如果大型航空模型制作需要翻新,也可以使用顏料進行航空模型制作重新上色,航空模型公司提示進行翻新工作之前一定要將航空模型制作的表皮灰塵清理干凈,如果有條件可以使用弱酸性的清潔水進行清洗航空模型制作,這樣上色以后附著能力好,不容易褪色。
If the production of large-scale aviation models needs to be renovated, pigments can also be used to re color the production of aviation models. The aviation model company reminds that the dust on the surface of the production of aviation models must be cleaned before the renovation work. If conditions permit, weak acid cleaning water can be used to clean the production of aviation models, so that the adhesion ability is good after coloring and it is not easy to fade.
The aviation model company reminds that no matter whether it is aircraft model production, skin maintenance or renovation, it must not touch open fire, stay away from the fire source, and the weather must be sunny for several days before and after the repair. More precautions come to our website http://elongconsult.com Consult and understand!
