大型艦船模型展示前后需要進行搬動，這一過程需要注意的事項有很多，細節性的問題也要做好預防，防止模型被破壞掉，那么大型艦船模型搬動時要注意什么事項？

　　Large ship models need to be moved before and after display. There are a lot of matters needing attention in this process, and detailed problems should also be prevented to prevent the model from being destroyed. What should be paid attention to when large ship models are moved?

　　大型艦船模型搬動應先切斷電源，然后將模型上的建筑搬起大約10多厘米左右，找到建筑與地板上電源連接的對插，按動對插兩邊的彈片對插就會自動松開，這樣就可以將建筑取下了，建筑取下時當心碰掩，較大的碰掩會導致建筑受損嚴黃，甚可能導致內部燈光系統全部毀壞。

　　Large ship lift should be cut off power supply first, then the model of construction lift more than about 10 centimeters, find and floor building power connector to plug, push to the shrapnel on both sides of the plug is inserted automatically loosen, this architecture can be removed, building be careful touch when take off mask, can lead to larger touch mask, buildings damaged huang yan, It could even destroy the lighting system inside.

　　然后從底座的檢修孔進入，找到分塊位置的電源連接對插。按動對插兩邊的彈片對插就會自動松開，然后再松開底盤分塊拼接上的螺絲，就可以把底盤拆分開來。安裝的時候按以上順序倒過來進行就可以了。

　　Then enter through the manhole of the base and find the power connection for the block position. Press the shrapnel on both sides of the plug will automatically loosen the plug, and then loosen the screws on the chassis block splicing, you can split the chassis. When installing, it is ok to reverse the above order.

　　大型艦船模型展示時不可避免的會落有灰塵，一段時間后都需要進行清潔，有提供一年質保期，質保期內提供四次衛生清潔，如平時堅持日常清潔和使用時注意防護，一般模型兩年后都依然面貌如新。這就要求現場維護人員能按時正確操作。

　　During the display of large ship models, there will inevitably be dust, and they all need to be cleaned after a period of time. One year warranty period is provided, during which four times of sanitary cleaning will be provided free of charge. If we insist on daily cleaning and pay attention to protection during use, generally the models will still look as new after two years. This requires on-site maintenance personnel to operate correctly on time.

　　此外大型艦船模型清潔應先從部位開始，向四周展開，日常清潔的話只需要清潔四周外圍即可，清潔根據展示空間和模型衛生情況確定，清潔并不是進行越多越好，因?yàn)槊看吻鍧崒δＰ投紩?huì)有一些影響。

　　In addition, cleaning of large ship models should start from the central part and spread to all sides. Daily cleaning only needs to be done around and around. Comprehensive cleaning is determined according to the display space and model hygiene condition.

　　大型艦船模型搬動時要注意什么事項？以上便是問題的相關解答了，當然日常維護的工具也要時刻準備好，防止意外來到不能及時的進行處理，更多內容就來網站elongconsult.com咨詢吧。

　　What should be paid attention to when moving large ship model? The above is the relevant answers to the problem, of course, the daily maintenance tools should always be ready, to prevent accidents to not timely processing, more content to the website elongconsult.com consultation.