1、先研究控制原理，制電路圖。
1. First, study the control principle and prepare the circuit diagram.
2、找電子廠求他們?cè)O(shè)計并制造電路板。
2. Ask the electronics factory to design and manufacture circuit boards.
3、編程員負責電路板的測試。
3. The programmer is responsible for testing the circuit board.
4、根據尺寸，然后用軟件開始做合適的3d模型，然后將其轉換成圖紙給模具組制造相關零件，此時電力控制部分與機械部分均已完成，經組裝后開始調試，此時編程員仍然是主導者，負責調試，若其功能玩好，就開始進行精加工和部分的改進。
4. According to the size, then use the software to make a suitable 3D model, and then convert it into a drawing for the mold group to manufacture relevant parts. At this time, the electric control part and the mechanical part have been completed, and the debugging is started after assembly. At this time, the programmer is still the leader, responsible for debugging, and if its function plays well, start to finish machining and part of the improvement.
5、終呈獻給大家的機器人看似結構嚴謹。
5. The robot finally presented to you seems to be structurally rigorous.
6. In fact, the cooperation of the large-scale robot model production team needs the support of some manufacturing enterprises.
7、高達模型是用射出成型機，射出板件，然后由買家自己組裝。
7. The Kodak model uses the injection molding machine to shoot the plates, and then the buyer assembles them.
8、成品玩具是用模具生產出多個零件，然后由工人組裝。
8. Finished toys are produced by molds and then assembled by workers.
9、先前都需要由設計師設計繪圖。
9. Previously, designers were required to design drawings.
此外在對機器人模型進行清潔的時候要切忌小心謹慎，一定要用干凈而又柔軟的布片來擦去塵埃，對于變形金剛模型有些溝處不易用布的地方好用毛刷或是吸塵器來吹走灰塵。我們?cè)诒ｐB(yǎng)機器人模型時，就要學會防御一些外界的有害化學物質，如：酸類、氯化物等等!還要就是在移動變形金剛模型時搬運工一定要手戴放可移動，不讓大家直接用手碰觸變形金剛模型的原因就是以免手上的汗腐蝕到它。
In addition, when cleaning the robot model, you should be careful. You must use clean and soft cloth to wipe away the dust. For some places where the cloth is not easy to use in the groove of the transformer model, you can use a brush or vacuum cleaner to blow away the dust. When we maintain the robot model, we should learn to defend against some harmful chemicals from the outside, such as acids, chlorides, and so on! Also, when moving the transformer model, the porter must wear it and put it on his hand. The reason why we can't touch the transformer model directly is to prevent the sweat on his hand from corroding it.
對于長時間經過擺放且出現暗啞現象的變形金剛模型，對他們進行擦試時不可大力用布擦，要用棉比質的細布輕輕擦試主要達到拋光的效果，也可讓模型表面的保護蠟層得到重新的綻放。如果加上一些特用的拋光物那就更再好不過了，但物料都需要進行選購才可以讓其返還其特有的色著。更多相關內容就來我們網站
http://elongconsult.com咨詢吧！
For transformers models that have been placed for a long time and appear dark and dumb, they should not be wiped with cloth vigorously, but should be lightly wiped with a fine cotton cloth to achieve the polishing effect, and the protective wax layer on the surface of the model can also be reborn. It would be even better if some special polishing materials were added, but the materials need to be purchased before they can be returned to their unique color. Come to our website for more relevant content http://elongconsult.com Ask!
