After the completion of the industrial model production, acceptance is required to ensure that the produced model meets the marketing strategy and appearance requirements of the display company. If there are errors and unexpected situations in the production of the industrial model, it is easy to make changes in a timely manner. In order to avoid the need for detailed modifications by the display company after the completion of the industrial model production, it is necessary to invite the person in charge of the display company to conduct acceptance after the preliminary production is completed, ensuring that the industrial model and design drawings are correct. The acceptance process needs to be provided for acceptance by the acceptance personnel. Below, the editor will talk about the acceptance standards for industrial models.

一、仿真度與精細度

1、 Simulation and precision

1.工業模型制作都是按照工業設備進行縮小或放大，所以在制作后需要對其模型的外觀尺寸進行確認，是否符合設計圖紙的制作要求。

1. The production of industrial models is based on the reduction or enlargement of industrial equipment, so it is necessary to confirm the external dimensions of the models after production to ensure they meet the production requirements of the design drawings.

2.這里需要展示公司負責人進行現場核對，從而避免圖紙與設計圖紙中存在的尺寸差異，也是雙方公司進行現場確認工業模型的道流程。

2. It is necessary to demonstrate that the company's responsible person conducts on-site verification to avoid dimensional differences between the drawings and design drawings, which is also the first process for both companies to confirm the industrial model on site.

二、結構

2、 Structure

1.工業模型展示的主題也是存在不一致的，有的公司模型展示工業產品的外觀，有的展示工業產品的內部結構，還有的展示其產品的工作原理。

1. The theme of industrial model display is also inconsistent. Some company models display the appearance of industrial products, some display the internal structure of industrial products, and some display the working principle of their products.

2.在進行驗收時，注意工業模型的展示主題，進行確認其內部構造與外觀問題。

2. During acceptance, pay attention to the display theme of the industrial model and confirm its internal structure and appearance issues.

三、燈光效果

3、 Lighting effects

1.燈光效果在工業模型中不是哪里都能使用的到，有些需要動態演示的工業模型需要設置燈光，以達到工業產品運行中的效果。

1. Lighting effects cannot be used everywhere in industrial models, and some industrial models that require dynamic demonstration require setting up lighting to achieve the effects of industrial product operation.

2.在這里需要對自身產品在運作中散發的光源進行確認，是否符合真實工業產品運行時的燈光場景。

2. Here, it is necessary to confirm whether the light source emitted by one's own product during operation matches the lighting scene of a real industrial product during operation.

四、污漬處理

4、 Stain treatment

1.在制作工業模型后，模型會留下一些比較難處理的污漬，污漬處理不好將影響到工業模型的展示效果，在驗收時，注意工業模型周邊是否存在污漬，如有則要求模型公司進行處理。

1. After making an industrial model, the model may leave some difficult to treat stains. Poor treatment of stains will affect the display effect of the industrial model. During acceptance, pay attention to whether there are stains around the industrial model. If there are any, ask the model company to handle them.